loading

MERITSUN Battry - The Best Battery Energy Storage System & Lithium Battery Solutions Provider.

debunking myths about li-ion and li-poly batteries - lithium ion polymer battery

debunking  myths about li-ion and li-poly batteries  -  lithium ion polymer battery

googletag. display("div-ad-articleLeader");
There are several common myths (
There are more, but most of them are just changes in both)
Around lithium-ion and lithium-polymer batteries, most of them come from the fact that people don't know the difference between the two, and people mistakenly think that what applies to other rechargeable batteries also applies to lithium-based ones. Myth 1 -
Charging the battery when it is not completely exhausted shortens its life, which is called the "memory effect", where the battery gradually loses its maximum energy capacity when charging regularly after only partial discharge. The Truth -
This is a mythical example that stems from the belief that lithium-based batteries behave the same way as other types of rechargeable batteries.
Memory effect is only applicable to nickel-cadmium batteries (Ni-Cad)
, Actually happens on such a slow scale that it takes about a hundred discharge/charge cycles before noticing the effect. Li-Ion and Li-
On the other hand, the poly battery is immune to the "memory effect" and, in fact, will benefit from charging after partial discharge.
This is because lithium-based batteries have a fixed number of discharge cycles after which they will start to lose their charging capacity.
So if you use it with a capacity of up to 50% and then fill it up with electricity, you consume only half of the discharge cycle.
Use it for up to 50% capacity, then recharge again, shorten the charging cycle by another 50%, and so on.
Myth 2: overcharging is dangerous and will explode your battery
Because there is some truth behind it, it is a myth that is broken. Lithium-
Polymer batteries can explode when overcharged.
However, they all have special circuits that can stop or decrease the charging rate when fully charged.
This means a Li-
The polymer battery will only be overcharged if there is a defect, so you need a defective battery before the battery explodes.
Even if the battery is full, you don't have to be afraid to plug it in, just like you just charged your laptop to 100% and decided to keep using AC, because your laptop does not allow you to use its separate graphics card when using battery power.
Still, you have to be rational.
When you don't use the battery for a long time, it's just a bad habit to have a full battery plugged in and charged, and it's also a sign that you're not taking good care of your gadgets.
The problem with the above two myths is that they cause people to actually be harmful to the battery, for example, constantly drain the battery before charging, making sure they pass the set number of discharges faster than normal. Lithium-
Rechargeable battery based is not a new invention in any case, but they are much better than the old nickel
Top-up products based on capacity and ease of use.
Don't waste the benefits they provide just because of the myths handed down by people you don't know.
Function articleAdMiddleLoad (){if (typeof jQuery ! = "undefined"){
Last position of Var = 0;
Minimum distance between Ads var = 1200;
Minimum distance from var at the bottom = 300;
Var adsToPlace = 20; for(var i = 1;
I /element is located after the ad & in the last position! $(this). hasClass(
"Article ")
/Element is not advertising &&($(this). position(). top -
Enough space between Ads & $ (". articleText"). height()-$(this). position().
Enough space from the bottom of the article | $ (this). prev(). hasClass(
"Article ")
/The previous element is a slide)){$(this). before($(
"ArticleAdMiddle ")); googletag. display("div-ad-
"I ");
$ (this). position(). top;
SpotFound = true; return false; }});
/If no location is found, stop looping and remove any remaining banner slots. if(! spotFound){for(var j = i;
J

GET IN TOUCH WITH Us
recommended articles
Knowledge Successful case News
What Information Is Needed for a Residential Energy Storage Quote?
Use this residential ESS RFQ checklist to submit the grid, load, PV, inverter, backup, site, approval and commercial data needed for a usable quote.
How to Compare Home Battery Quotes: A Bid-Normalization Guide for Installers and Distributors
A practical bid-normalization guide for comparing home battery energy, power, inverter scope, approvals, commissioning, warranty and support.
Nominal vs. Usable Home Battery Capacity: What Installers Should Calculate Before Quoting Runtime
Learn how nominal kWh, starting SOC, reserve settings, conversion losses and load profile determine usable home-battery energy and backup runtime.
Is 128 kWh Enough for Whole-Home Backup? Inside a Caribbean Residential Installation
See how a 128 kWh MERITSUN battery bank, 28.8 kWp solar array and Schneider inverter platform support whole-home backup in Punta Cana.
Project Complete: 48 kWh Whole-Home Storage With Three MSP-6KW Units
A 48 kWh MERITSUN home storage system is now in service, using three 6 kW all-in-one units to support separate household load groups.
60 kWh Farm Battery Storage in the U.S.: What This 12-Module Project Shows
Analyze the design logic behind a U.S. farm project using 12 parallel MERITSUN battery modules, a 60 kWh-class battery bank and a Schneider inverter.
Home Battery Sizing Guide for Solar Installers: 10kWh, 20kWh and 30kWh Systems
A practical MERITSUN home battery sizing guide comparing 10kWh, 20kWh and 30kWh systems for solar installers, EPCs, dealers and distributors.
MERITSUN 100kWh Commercial Battery Storage Installation Case: Scalable Solar Backup for Small Businesses and Farms
A MERITSUN 100kWh rack-mounted LiFePO4 battery storage installation case for small businesses, farms, and light commercial sites that need scalable solar backup, smart BMS protection, and dependable energy resilience.
MERITSUN 30kWh Home Battery Installation Case: Clean, Scalable Solar Storage Upgrade for Modern Homes
Residential solar projects are changing. Homeowners no longer look at solar panels as a single energy-saving upgrade. They increasingly want a complete home energy system that can store daytime solar power, support essential loads during grid interruptions, and remain easy for in
MERITSUN 50kWh Hotel Battery Installation Case: Rack-Mounted Solar Storage for Light Commercial Backup
 MERITSUN 50kWh Hotel Battery Installation Case: Rack-Mounted Solar Storage for Light Commercial Backup For small hotels, boutique resorts, guesthouses, and coastal commercial properties, reliable electricity is directly connected to customer experience. Lighting, Wi-Fi, refrige
Established in 1999, we have 20+ years of energy professional experience and integrated solutions services in energy storage application industrial, and further reach the demands the smart & green energy era. 
Copyright ©1999-2025 MeriTech Power Limited - www.meritsunpower.com | All Rights Reserved | Sitemap | Privacy Policy
Customer service
detect