loading

MERITSUN Battry - The Best Battery Energy Storage System & Lithium Battery Solutions Provider.

Plug-In Hybrid Retrofit Kit Could Greatly Improve Gas Millage For Only $3000 - lithium ion battery pack

Plug-In Hybrid Retrofit Kit Could Greatly Improve Gas Millage For Only $3000  -  lithium ion battery pack

Nino Marchetti from the Earth Institute of Technology: The smart minds of young college students and their mentors play a role again in the world of green technology.
This time at the scene is the Middle Tennessee State University (MTSU), the project under development is a plug-in
The hybrid modification kit is said to be suitable for almost any car.
Professor Charles Perry and a group of MTSU students related to the university's engineering technology department have been developing hubs, plugs for the last few years
Hybrid modified kit.
This green car technology, which is currently in the proof-of-concept phase, is now seeking funding from private investors to showcase its manufacturing version.
According to MTSU, Perry's hub technology was recently installed on a 1994 Honda wagon and helped increase the gasoline mileage of the research vehicle from 50 kilometers to 100% kilometers. FuelEconomy.
Gov said that assuming this is 1994 Honda Accord station wagon, the original EPA rating MPG was 23.
In the video below, Perry describes how the technology works.
In the two internal rear wheel brake structures, the DC brushless motor is basically added.
Connected to the lithium ion phosphate battery pack installed at the rear of the vehicle, they complement the traction provided by the car's general gas engine, reducing both the required gas volume and increasing the MPG.
The technology was designed for urban use.
According to Perry, it is also very innovative here that the system is mainly built with ready-made components.
What is the secret of how they add electric traction.
"The key is to prove the feasibility of adding the motor to the rear wheel of the car without changing the brakes, bearings, suspension
Perry said in a statement: "Anything mechanical.
As for the cost, if it really goes on sale, it could be sold for around $3,000, which is much lower than buying a shiny new plug
A hybrid like the upcoming Ford Energi.
In addition to the consumer car, the possible application of this technology also includes companies with fleets.
On the other hand, this is not the only green technological innovation that the university has been tinkering with in the automotive sector.
For example, on January, a modified Toyota Prius plug
In hybrid cars powered by solar, hydrogen, and ethanol, off-road driving will take place.

GET IN TOUCH WITH Us
recommended articles
Knowledge Successful case News
Greenhouse Battery Backup Planning: Controls, Pumps, Fans and Lighting
Plan greenhouse battery backup by prioritizing controls, alarms, irrigation, fans, pumps and lighting, then checking startup power, runtime, SOC reserve and transfer behavior.
How to Size Battery Backup for a Small Studio or Home Business
Size battery backup for a studio, shop or home business by defining critical loads, peak power, usable energy, transfer needs, SOC reserve and recharge strategy.
IP65 Outdoor Home Battery Installation: What Installers Must Verify Beyond the Rating
Learn what IP65 covers, what it does not, and what installers must verify for outdoor home batteries: location, heat, drainage, corrosion, cable entries and commissioning.
What Information Is Needed for a Residential Energy Storage Quote?
Use this residential ESS RFQ checklist to submit the grid, load, PV, inverter, backup, site, approval and commercial data needed for a usable quote.
How to Compare Home Battery Quotes: A Bid-Normalization Guide for Installers and Distributors
A practical bid-normalization guide for comparing home battery energy, power, inverter scope, approvals, commissioning, warranty and support.
Nominal vs. Usable Home Battery Capacity: What Installers Should Calculate Before Quoting Runtime
Learn how nominal kWh, starting SOC, reserve settings, conversion losses and load profile determine usable home-battery energy and backup runtime.
Is 128 kWh Enough for Whole-Home Backup? Inside a Caribbean Residential Installation
See how a 128 kWh MERITSUN battery bank, 28.8 kWp solar array and Schneider inverter platform support whole-home backup in Punta Cana.
Project Complete: 48 kWh Whole-Home Storage With Three MSP-6KW Units
A 48 kWh MERITSUN home storage system is now in service, using three 6 kW all-in-one units to support separate household load groups.
60 kWh Farm Battery Storage in the U.S.: What This 12-Module Project Shows
Analyze the design logic behind a U.S. farm project using 12 parallel MERITSUN battery modules, a 60 kWh-class battery bank and a Schneider inverter.
Home Battery Sizing Guide for Solar Installers: 10kWh, 20kWh and 30kWh Systems
A practical MERITSUN home battery sizing guide comparing 10kWh, 20kWh and 30kWh systems for solar installers, EPCs, dealers and distributors.
Established in 1999, we have 20+ years of energy professional experience and integrated solutions services in energy storage application industrial, and further reach the demands the smart & green energy era. 
Copyright ©1999-2025 MeriTech Power Limited - www.meritsunpower.com | All Rights Reserved | Sitemap | Privacy Policy
Customer service
detect